Sydney Metro West – Eastern Tunneling Package
Overview Sydney Metro West works is across three key packages to construct the civil tunnels and shafts of the metro. The Eastern Tunnelling Project is the section from The Bays to Hunter Street CBD, with the line running through Pyrmont. It also includes the construction of the station boxes at Pyrmont and Hunter Street in […]
Central West Pumped Hydro
Overview The Central West Pumped Hydro ECI involved design, planning and pricing the construction of a 325MW electrical generation and storage facility, with the ability to generate 2,600MWh of energy and provide power to more than 153,000 homes. The project included the design of access roads and water supply infrastructure, upper and lower reservoirs, […]
Hunter Power Project
Overview The Hunter Power Project is a critical state significant infrastructure project and includes the design and construction of a 660MW gas fired power station. The power station comprises of two heavy-duty, open cycle gas turbines. The turbines will be able to operate on natural gas and hydrogen and provide critical firming energy infrastructure for […]
Sydney Metro
Overview The Skytrain takes the Sydney Metro above ground for four kilometres, between Kellyville and Rouse Hill, is between 10-13m above ground level and is supported by 112 concrete piers. The project is valued at $12.5 billion. CJC’s Role CJC’s responsibilities included expert advice on the pre-cast concrete operations, construction of the cable stayed bridge […]
Project Energy Connect
Overview The high voltage electricity interconnector, collectively known as EnergyConnect, involves the design and construction of high voltage transmission lines from the South Australian border to Wagga Wagga, 710 kilometres in length, major substation construction at Buronga and Dinawan and station upgrades at Wagga Wagga and Red Cliffs. CJC worked as part of the pre-contracts […]
M7 Widening and M12 Interchange
Overview The project includes the widening of 23km of the M7 Motorway between Richmond Road and the M5 Motorway and the construction of a new interchange to connect to the proposed M12 Motorway. Works included the widening of over 40 bridge structures, several of which were similar in structure type to the Commonwealth Ave Bridges. […]
M6 Extension Stage 1
Scope The M6 Extension Stage 1 project will provide a motorway standard link between the New M5 at Arncliffe and the existing M1 Princes Motorway at Loftus. It will connect St George, Sutherland Shire and the Illawarra regions to the Sydney Motorway network. The 3.8km section provides the critical link to the major gateways […]
Inland Rail Grade Separating Road Interfaces
Scope The Australian Rail Track Corporation (ARTC) Inland Rail project is the upgrade of the freight rail network from Melbourne to Brisbane via Victoria, New South Wales, and Queensland. As part of the Inland Rail Grade Separation Program, Transport for NSW is currently investigating the grade separation of 22 sites where existing highways interface […]
WestConnex Stage 1A M4 Widening
Scope WestConnex Stage 1 M4 Widening involved building an additional lane in each direction on the M4 Motorway, between Parramatta and Homebush. The project is approximately 7.5km long. The responsibilities of our team included implementation of risk management project controls, project preparation and readiness, interface management with utilities providers and stakeholders, review of the design against […]
Sydney Yard Access Bridge
Scope The Sydney Yard Access Bridge project was the first early and enabling works package of the NSW Government’s Sydney Metro City & Southwest project. The 130m long bridge crosses five intercity lines that had never been closed under a single possession. While a full closure was planned, the main girders and cross girders were […]
Dubbo Airport Northern RPT Apron Extension
Scope The scope of the project includes an extension of the existing apron adjacent to Bay 1 to create a new aircraft parking position and includes additional infrastructure changes to accommodate storm water drainage, aeronautical ground lighting and floodlighting. CJC is supporting the Dubbo Airport team in preparing tender documentation and will also likely provide on-site […]
Sydney Airport Civil Assets
Scope CJC Management were engaged by Sydney Airport Corporation Limited to develop a Civil Assets Manual, provide ad-hoc friction testing training, and technical advisory services across the entire airfield. A further document which covers Friction Management at the Airport was requested as part of the scope. This included training and induction into friction management activities. […]
